
68
Technical Data • Individual Components
Mobile Panel User's Manual V 1.5
3.4 Switching Cabinet Cable Crossover
The pin assignments for the Ethernet plug (crossover) make it possible to connect directly to a
B&R controller e.g. CP360 or to the first Ethernet connection (MDIX) on the B&R Ethernet Hub
AC808 (Mod.No. 0AC808.9).
If a different Ethernet hub is being used, it must be able to support the crossover of the RX and
TX lines.
The switching cabinet cable is required for the wiring inside the switching cabinet.
The surface is protected against water, oil (protected against lubricating and hydraulic oils
according to EN 60811 section 2-1) and cooling lubricant.
The connection housing is used to connect the switching cabinet cable to the switching cabinet
door (see figure 36 "Drilling template for the switching cabinet socket" on Page 72). The other
end of the switching cabinet cable has a pre-made RJ45 Ethernet plug. The rest of the lines have
an open end with wire tip sleeves. This makes it easier to wire the cable to safety equipment and
the other connections.
3.4.1 Shielding in the Switching Cabinet
The supply cable pair has a shield conductor (gray wire - see section 3.4.3 "Cable Specifications"
on Page 70) which must be connected to an object in the switching cabinet with ground potential.
The CAN cable pair also has a shield conductor (black wire - see section 3.4.3 "Cable
Specifications" on Page 70) that must be attached to the CAN bus shield.
Figure 34: Mobile Panel switching cabinet cable 5CAMPC.0020-00
Information:
The seal, which is attached to the connection housing, must be placed between the
connection housing and the switching cabinet door.
Industrial plug for
switching cabinet installation
Ethernet RJ45 +
shield (4
)
conductors
RS232
(3
)
conductors
Entry devices
(6
)
conductors
Enable switch
(6 conductors)
CAN + shield
(4 A
)
conductors
ground
(3
)
conductors
Содержание 4MP181.0843-03
