berlinger Fridge-tag 2, Руководство пользователя, Страница: 21 / 121

USER MANUAL Fridge-tag 2 | 2 E Page 21 www.berlinger.com
To change the date format, the date, the time, the temperature
measurement unit or the alarm settings or to read the preset
alarm limits please proceed as follows:
SET DATE (internal sensor) is now displayed on the screen.
OUTSIDE (external sensor) is now displayed on the screen.
You entered the menu mode and may choose which entry to
see or change.
Use the READ button to scroll through the menu.
Use the SET button to access the corresponding menu.
You can access the following 4 menus:
OUTSIDE (external sensor) : first screen, shows the
temperature measured with the internal sensor of the Fridge-tag
(normal ambient temperature).
Press READ once to get to SET DATE.
SET DATE (internal sensor)
: Configuration with internal sensor,
SET DATE is directly shown.
1. SET DATE change date and / or time settings
2. READ CONF read the alarm settings
3. CELS FAHR change the temperature unit
4. SET CONF change the alarm s ettings
(only if enabled in factory setting)
Press and hold
SET ...
1
... then press
READ ...
2
... and release both but-
tons simultaneously.
3
6.2. Initial menu (read and change settings)
Temperature (min/max)
< 8°C
(15min)
> 25°C
(15min)
0123456789012
-27d -25d -23d -21d -19d -17d -15d -13d -1
1d
-9d -7d -5d -3d yesterd. -29d -
28d
-26d -24d -22d -20d -18d -16d -14d -12d -10d -8d -6d -4d -2d today
Time / Alarm duration Alarm state
= OK
= ALARM
Fridge-tag
®
dd.mm.yyyy
ENGLISH