manualshive.com logo in svg

Berker 75310002, Техническая документация инструкция, Страница: 96 / 174

Поделиться
Скачать
Berker 75310002 Скачать руководство пользователя страница 96

Switch/shutter actuator 8/4gang 16A RMD 
75318003 
Switch/shutter actuator 16/8gang 16A 
RMD 
75310002 

Technical 

Documentation

 

 

 

© Berker GmbH & Co KG 2007 

 

Version: 04.04.2007 

Part 5  

(Subject to prior change)

 

 

75310002.doc

 

Seite: 96 / 174 

 

 

Presetting the priority of sun protection 

The priority of the sun protection function can be set separately for each output. In the simple sun 
protection, the priority relations between the "Sunshine / shading facade" object and the objects of direct 
operation (short-time, long-time, central or position telegram, scene recall) must be configured. 

For the sun protection parameters to be visible, the sun protection function must be enabled on parameter 
page "Ax – Enabled functions (x = number of output). 

  Set the parameter "Priority of sun protection with respect to direct operation" on parameter page "Ax - 

sun protection" to "same priority". 

The sun protection mode can be overridden at any time by direct operation. In the same way, the sun 
protection overrides the direct operation, when a new "sunshine" telegram is received via the "Sunshine / 
shading facade" object and when a parameterized time delay, if any, has elapsed.  If the sun protection 
function is overridden by a direct operation, the preset behaviour "Reaction at the end of sunshine / 
shading" will not be executed. 

  Set the parameter "Priority of sun protection with respect to direct operation" on parameter page "Ax - 

sun protection" to "higher priority". 

An active sun protection will override a direct operation. The sun protection mode can therefore not be 
interrupted by a direct operation. Direct operation will be possible again only after the sun protection 
function is terminated.  

  Set the parameter "Priority of sun protection with respect to direct operation" on parameter page "Ax - 

sun protection" to "lower priority". 

A direct operation can at any time override the sun protection mode. If the sun protection function is 
overridden by a direct operation, the preset behaviour "Reaction at the end of sunshine / shading" will not 
be executed. The sun protection function can only be reactivated after an enabling movement controlled 
by a direct operation has been effected and after a new "sunshine" telegram has been received via the 
"Sunshine / shading facade" object. If the enabling movement has not yet occurred, any  attempt to 
activate the sun protection will be disregarded. 
Enabling movement: 
An enabling movement is an accomplished long-time travel movement into the upper end position which 
has been initiated by the objects "Long-time operation" or "Central travel control" A manual control, an 
upward travel movement after bus voltage failure or bus voltage return, a position approach to "0 %" or 
an upward travel movement after releasing enabling of forced-position or safety functions have no 
enabling effect. 
The sun protection is not enabled if the enabling movement has been interrupted. The sun protection 
function will be also be interlocked, if the output has been re-adjusted again by a direct operation after an 
accomplished enabling movement.

 

After an ETS programming operation or after switch-on of the supply voltage (bus and mains voltage) the 
sun protection function is generally enabled. 

 

  Manual local operation on the device itself, the forced position function and the safety functions have a 

fixed priority higher than that of the sun protection. The sun protection is overridden – but not terminated 
– by a function with a higher priority. After the end of the function with the higher priority the reaction at 
the beginning of sun protection will therefore be executed again, if the sun protection is still active at this 
time.  

  With the settings "same priority" or "lower priority", the sun protection can be overridden by a direct 

operation only if the direct control action can be executed at once. A direct operation will therefore not be 
able to override the sun protection during a manual control locally on the device, an active forced position 
function or an active safety function. 

 

  Parameter setting "same priority" or "lower priority": A variable preset of curtain and slat positions or of a 

slat offset via the bus at the beginning of sunshine / shading shows no reaction at the output, if the sun 
protection was overridden by direct operation. However, the position data or offsets received are stored 
internally so that the new positions will be approached on reactivation of the sun protection. 

Содержание 75310002















































































































































































Отзывы:

Нет отзывов