USER MANUAL 1.2 | B-NIMIS MC-PI AND BC-PI SERIES
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com
11
1.7. Transport and storage
The unit is sensitive to shocks, strong vibrations, humidity and extreme temperatures.
Transport and storage
Protect the unit from strong mechanical stresses during transport.
Always transport the unit in its original packaging.
Observe the environmental conditions applicable to storage.
Protect the unit from precipitation and moisture.
Operation
After storage or transport in cold weather or with strong temperature fluctuations, do not operate
the unit until it has reached the room temperature of the place of use.
Wait at least 12 hours after dew has formed before operating the unit.
1.8. Unpacking
When receiving the unit, make sure that the delivery is undamaged and complete.
Check the packaging for external damage.
If there is serious damage to the packaging or if damage to the contents is apparent: Do not
open the packaging any further and inform the carrier and your supplier immediately.
Remove the packaging and keep it for re-transport.
Check the contents for visible transport damage.
Check the contents against the order for completeness and be sure to retain all documenta-
tion supplied. The documentation supplied contains important information about the unit and
is part of the product.
If you notice transport damage or discrepancies between the order and the delivered con-
tents: Inform the supplier immediately.
