USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen |
12
2
Safety instructions
Respect the following safety instructions when handling the B-EasyConnect to protect yourself and
the equipment from damage.
The device must only be operated in proper condition.
During thunderstorms, there is a risk of lightning strikes and overvoltage damage to connected
electrical equipment
Do not install the operating equipment during a thunderstorm.
Wetness and liquids getting into the B-EasyConnect can cause electric shocks or short cir-
cuits.
Do not allow any liquids to enter the interior of the operating equipment.
Make sure that all ventilation openings are free and not covered up.
Protect the operating equipment from dust, moisture and vapors.
Use strong, hard-to-guess passwords when configuring your WLAN network to ensure IT se-
curity
Working on the device
Disconnect the B-EasyConnect from the controller or computer before cleaning.
Dust, moisture and vapors as well as harsh cleaning agents or solvents can damage the
operating equipment.
Clean the operating equipment with a dry or slightly damp, lint-free cloth.
Do not open the housing of the operating equipment.
Improper opening and improper repairs may pose a risk to users of the equipment.
In case of repair, hand over the equipment to the manufacturer or its authorized customer
service.
