Translated user manual V9-EN
BeNomic EasyLeaf
29 / 44
8.5 Inspecting the carbon brushes
Figure 5a: Cleaning the carbon brushes
Dismantle the black plastic cover and blow the motor clean using (dry) compressed air.
Figure 5: Inspecting the carbon brushes
Replace carbon brushes shorter than 1 cm, consult your dealer.
8.6 Chain maintenance
(
http://www.berghortimotive.com/nl/bsa/bsa-film
)
Before carrying out the activities for a safe working situation as described below, see
the instruction film on our site!
1. Disconnect the power plug.
2. Unscrew the motor bolts (figure 6)
3. Tension the chain by tightening the adjusting bolt (figure 7)
4. Secure the motor bolts (figure 6)
Allow a chain slack of about 1 cm.
Figure 6: Unscrewing/tightening the motor bolt
Figure 7: Tensioning the chain