Translated user manual V9-EN
BeNomic EasyLeaf
24 / 44
Efficient usage:
•
Try to match the speed as closely as possible with the work tempo (potentiometer).
•
If the speed is set optimally, fewer stops and starts are required which has a very
positive effect on the wear of the
BeNomic EasyLeaf
.
•
By following the above recommendations, the productivity of the workers will increase
too.
Regardless of the level of usage, charge the batteries at least once a week using a
suitable charger! Prevent the batteries from being fully depleted before charging!
7.5 Moving the BeNomic EasyLeaf on the concrete path
Always walk behind the
BeNomic EasyLeaf
when moving it. Thanks to the swivel wheels, the
BeNomic EasyLeaf
can be easily turned and moved using the push handles for this.
7.6 Use of the emergency stop
The
BeNomic EasyLeaf
is fitted with an emergency stop. In the event of an emergency, the
BeNomic EasyLeaf
can swiftly be brought to a standstill by engaging this emergency stop. The
emergency stop is easy to recognise by its red colour and yellow background. If the emergency
stop is engaged, the
BeNomic EasyLeaf
will stop immediately.
The emergency stop switch continues to be mechanically blocked and the
BeNomic EasyLeaf
cannot be restarted. This enables assistance to be provided straight away in the event of a
personal accident.
The emergency stop can also be used in the event of sudden and imminent danger, for
example a process that has gone out of control.
Once the danger has been removed, the emergency stop switch can be released (see chapter
7.7: Starting up after engaging the emergency stop).
7.7 Starting up after engaging the emergency stop
Never release an emergency stop (reset) if you do not know who engaged the
emergency stop and why.
1. Check whether the situation is safe to switch on the
BeNomic EasyLeaf
.
2. Set the driving direction selection switch to zero.
3. Turn the speed regulator knob to zero.
4. Then pull the EMERGENCY STOP out.
5. The
BeNomic EasyLeaf
can be operated again, continue at step 5 chapter 7.1.
7.8 Use of platform height adjustment
Always use both hands in marked places so that there can
never be crushed. When adjusting upwards, a click will be
heard at each locking position. If the required height has
been attained, carefully allow the platform to drop until it is
secured.
To lower the platform, it must first be fully raised and then
carefully lowered, never let go of the platform while doing
this! When the bottom position has been reached, you can
adjust the required height as described above.
Check and maintain the platform height securing mechanism regularly as described at 8.4