Translated user manual V9-EN
BeNomic EasyLeaf
16 / 44
5. Transport
The
BeNomic EasyLeaf
must be transported with the utmost care in order to
prevent damage and accidents.
5.1 External transport
If the
BeNomic EasyLeaf
needs to be transported, please follow the procedure below:
1. Set the driving direction to neutral (0) and the speedometer to speed 0.
2. Switch the
BeNomic EasyLeaf
off using the central lock (disconnect the power plug
from the socket).
3. Lower the platform.
4. Properly secure the
BeNomic EasyLeaf
to prevent it from sliding, rolling, or toppling
over.
5. Ensure that the
BeNomic EasyLeaf
remains dry and frost-free during transportation.
6. After having arrived at its destination, the
BeNomic EasyLeaf
must be set up in
accordance with the points described at chapter 6 (Putting into operation).
Due to the asymmetrical weight distribution, moving with a forklift truck is forbidden!
6. Putting into operation
The
BeNomic EasyLeaf
is exclusively suitable for running on a pipe rail system
according to the horticulture sector guidelines, the health and safety catalogue
in force in the Netherlands.
Use the
BeNomic EasyLeaf
exclusively on the correct type of pipe rail system.
You must check whether the centre-to-centre pipe distance corresponds with
the
BeNomic EasyLeaf
, see chapter 10: Specifications.
The
BeNomic EasyLeaf
may only be operated once it has been correctly
installed on the pipe rail system.
Do not switch on the
BeNomic EasyLeaf
if its protective covers have been taken
off or opened up. Prior to switching on the
BeNomic EasyLeaf
, all protective
covers must have been replaced.
Only use this
BeNomic EasyLeaf
for the purpose for which it was designed. The
BeNomic EasyLeaf
may only be used for maintaining crops in greenhouses.
Never use the trolley outside or on the public road.
Using the
BeNomic EasyLeaf
when tilting more than 2 degrees (linearly and/or
crosswise) is strictly forbidden.
Ensure the recommendations are implemented with regard to electric voltage
(V) and frequency (Hz). Remove the charging plug before using the
BeNomic
EasyLeaf
.