2 | INSTALLATION
14
- the electrical system is compliant with the applicable regulations
and has been installed by qualified professionals
In the event of a replacement, the system must be inspected by the
designer or by another competent person, and must be compliant
with the technical requirements, as well as the current legislations
and regulations.
The manufacturer shall bear no responsibility for any damages
caused by incorrect system installation.
2.10 Refrigerating connection
The dimensions and positions of
cooling connections are shown
hereunder.
MODELLO 9000-1 - 24000-1
1
Gas line connection
2
Liquid line connection
3
Service connection
MODELLO 12000-1 - 18000-1
1
Gas line connection
2
Liquid line connection
3
Service connection
Model
9000-1
12000-1
18000-1
24000-1
Connections
Liquid line
connection
Pollici
1/4
1/4
1/4
1/4
Gas line
connection
Pollici
3/8
3/8
1/2
1/2
Charge
connection
Pollici
1/2
1/2
1/2
1/2
