12
In the case the outside sensor is fitted
(external temperature displayed) the
and
buttons increase or decrease of
equivalent degree indicated on display,
the room comfort level (from – 5 to +5)
HOLIDAY mode with choice how
many day off (by increasing or decreasing
using the button
and
). The
heating request to the boiler is to maintain
the economy temperature on the room
(T2). The number of days off is
considered on the day starting from
midnight. After the counter down is ended
the programmer switch to AUTO mode.
PARTY mode automatically switch
the
programmer
ON
to
comfort
temperature (T1). This status is forced up
to midnight, after, the programmer goes
back to the programmed timing fascia.
Other functions (common to crt and
rEc modes):
Battery low
Alarms and reset (only for rEc type)
Technical menu (only for experts)
O
PERATING INSTRUCTIONS
The programmer is factory set as room
thermostat type (crt). Most of the
parameters are already set, at the start
up it is necessary to set the time and the
day (please note no solar fuse is pre-
charge inside therefore if during the year
there is time modification it must be
adjusted).
The following operation must done at
start up
E
ND USER MENU
(
MAIN MENU
)
