11
described. Additionally it is possible to
have a feedback from boiler status and
alarms. The display in rEc type give more
information
according
the
already
mentioned start up indications.
The 4 status mode have additional
functionality compared with the type room
thermostat.
Status mode in rEc: select the heating
mode button for fast switching between
the 4 status OFF – AUTO – PARTY -
HOLIDAY.
OFF mode, the heating request to
the boiler is off, on display there is not
equivalent icon, the heating layer and the
programming fascia is off. With this mode
only the frost protection function is active.
The DHW function is active and it is
possible to increase or decrease the
target temperature by pressing the
and
buttons.
AUTO mode: the heating request is
according the programmed timing and
room temperature. In AUTO mode it is
possible
to
increase
or
decrease
temporary the room set temperature by
pressing the
and
buttons, only if
the current time is inside in a heating ON
fascia. The temporary new temperature
set (T1) is maintained only inside the
timing fascia. The next heating fascia will
be
back
to
the
original
T1
set
temperature. It is possible to check the
target flow temperature communicated to
the
boiler
(according
the
various
calculations) by pressing once the
buttons only if the current time is inside in
a heating ON fascia.
