Bercomac 700980-1BER, Руководство пользователя

Страница: 16 / 48

Accessory Hook-up & Unhook
14
Place transmission in park, set park brake, shut power
equipment off, and remove switch key to avoid
accidental starting. See “vehicle shutdown procedures”
in the operation section
Remove from 3pt Style Hitch:
A. If needed, adjust length of upper center 3point link
until hitch pin can be removed from hitch frame.
B. Remove all hardware that connect 3pt lower arm
hitch to the accessory (see Hooking-up section for
part identification)
C. Move tractor lower arm and top link away then put
back the hardware on all hitch location on the
accessory (see Hooking-up section for part
identification)
D. Check the stability of the accessory to make sure the
unit will not tip easily in any direction (forward,
backward,…). If required add support where needed
to make sure the accessory will not overturn
Refer to “long - term” storage when storing the accessory
for a long time