Bercomac 700968-1-33V, Руководство пользователя

Страница: 22 / 60

Adjustments
20
Adjustments
DANGER
TO AVOID SERIOUS INJURY OR DEATH
Before leaving the operator’s seat, lower attachment to
the ground, set park brake, turn off vehicle engine and
remove key and disengage accessory PTO, kill accessory
engine with emergency switch and keep the emergency
switch engaged until you need to start the accessory
engine. See pre-start instruction before starting engine.
Never allow anyone in or near the operating station when
you are working on/around the vehicle or accessory.
DANGER
To avoid serious injury or death :
Proceed to the assembly/adjustment on the accessory
after it has been properly attached to the vehicle and
secured with solid support. Never work around /under
equipment supported by hydraulics. Hydraulics can drop
equipment instantly if controls are actuated or if
hydraulic lines burst even when power to hydraulics is
shut off.
Skid shoe adjustment
LEVEL PAVED SURFACE : Adjust skid shoes to allow 3/16”
to 1/4" or 5 mm to 7 mm clearance (A) between cutting
edge and surface.
UNEVEN OR GRAVEL SURFACE: Adjust skid shoes to allow
1/2” to 5/8" or 13 mm to 16 mm clearance (A) between
cutting edge and surface.