Berbel Smartline BWH 90 ST страница 29 Скачать руководство пользователя

Страница: 29 / 32

Disposal

6005738_0 – 25.03.2021

Disposal

8.1

Disposing of packaging

ATTENTION!

Risk of environmental damage due to improper disposal

of the packaging!

☞

Do not put the packaging into the normal household
waste.

☞

Take the packaging for environmentally friendly and
proper recycling.

The packaging provides protection from transport damage.
Only the original packaging guarantees sufficient protection
during transportation.

☞

Store the packaging in a location which is inaccessible to
children.

The packaging materials have been selected from an
environmentally friendly perspective and are made from
re-usable materials. The packaging materials can be returned
to the raw materials cycle after use. This saves valuable raw
materials.

The outer packaging is made from cardboard.

The filling material and the insets are made from
cardboard or polythene (PE).

The protective film and bags are made from
polythene (PE).

☞

Dispose of the packaging in an environmentally friendly
manner, separated by materials.

8.2

Disposing of the device

ATTENTION!

Risk of environmental damage due to improper disposal

of the device!

The device is subject to the European Directive 2012/19/EU
and should not be disposed of with household waste.

☞

Do not put the device into the normal household waste
at the end of its service life.

☞

Enquire about the disposal options or environmentally
friendly and proper recycling opportunities with your
municipal or regional authorities.

☞

Render the device unusable after dismounting it, e.g. by
cutting the de-energised mains cable.

☞

Dispose of the device in accordance with the legal
provisions via a professional disposal centre or at your
local disposal facility.

WEEE-Reg.-Nr. 59614689

Содержание Smartline BWH 90 ST

































Результаты поиска

Содержание Smartline BWH 90 ST

Отзывы:

Похожие инструкции для Smartline BWH 90 ST

Бренды по названию

Популярные бренды

Berbel Smartline BWH 90 ST, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание Smartline BWH 90 ST

Отзывы:

Похожие инструкции для Smartline BWH 90 ST

Бренды по названию

Популярные бренды