Berbel Firstline Unseen BEH 60 FLU, Инструкции по эксплуатации и установке для моделей

Страница: 27 / 36

27
Operation
6003295_g – 19.03.2019
EN
4.2.2 Run-on function
The device comes with a run-on function. When the function
is used, the device continues to work 10 minutes after being
switched off.
In recirculated air mode, it is necessary to use the run-on
function so that the device can remove the remaining
odours. Using the run-on function increases the life of the
filter filling. The filter filling must be replaced at regular
intervals.
The run-on function can be switched on manually or
automatically. The device is delivered with the automatic
run-on function active.
Button Function
Automatic
The device is switched on with power level 1.
☞
Press button 1x.
y
The device switches off.
y
The run-on time (10 minutes) starts
automatically in power level 1.
y
The power level 1 button flashes.
If the button is pressed again, the device shuts
off completely.
Manual
The device is switched on, and any power
level is selected.
☞
Press button 1x.
y The run-on time (10 minutes) starts in
the selected power level. The power level
setting is automatically switched down to
level 3.
y The button for the active power level
flashes.
If the button is pressed again, the run-on
function stops.
Automatic or manual setting
The device is turned off.
☞
Press the button for longer than
10 seconds.
y The setting changes between automatic
and manual.
y All buttons flash five times.
4.2.3 Hob lighting
The hob lighting is fitted with energy-saving LED lighting.
The lighting can be used at any time and independently of
the fan.
Switch illumination on/off
Button Function
☞
Press button 1x, in order to switch the hob
lighting on or off.
Set colour temperature
Button Function
☞
Press the button longer than 1 second to
start the color selection.
☞
Let up on the button when the desired
colour temperature is reached.
The color cycle stops, and the selected color
temperature is saved.
4.2.4 Filter filling indicator
The device has a control indicator to remind the operator
to change the filter filling. If no air circulation filter is used,
the control indicator has no meaning.
The control indicator flashes every 1,000 operating hours.
The hours counter is started anew by switching off the
control indicator.
Button Function
After switching off, the button flashes for
2 minutes:
The filter filling must be replaced.
D
“6.2.2 Replacing filter filling (with
recirculated air mode)” (page 30).
When the filter filling has been changed:
☞
Press the button.
The hour counter restarts, and the flashing
indicator turns off.