Berbel BIH 100 GL, Инструкции по эксплуатации и монтажу

Страница: 26 / 36

26
Operation
6005735_0 – 31.03.2021
4.3 Configuring the device
Button Function
The device is switched on.
☞
Touch and hold 1x button for longer than
5 seconds until the configuration steps are
complete.
All buttons flash.
The device switches to configuration mode.
The configuration mode is turned on.
To exit the configuration mode:
☞
Release button.
The settings are now saved.
The device is in normal mode again.
In configuration mode, the following functions can be set by
touching the corresponding button.
Button Function
AutoRun.
As delivered, the function is turned on.
☞
Touch the button one time.
Button glows brightly:
The AutoRun automation is activated.
☞
Touch the button one time.
Button flashes:
The AutoRun automation is deactivated.
Extraction mode / recirculated air mode
changeover.
As delivered, the function is turned off.
☞
Touch the button one time.
Button glows brightly:
The changeover function is activated.
☞
Touch the button one time.
Button glows dimly:
The changeover function is deactivated.
Reset hours counter
The control indicator for changing the filter
filling blinks every 1000 fan operating hours.
A reset can be used to reset the hours counter
to zero.
☞
Hold the button (> 1 second).
The counter restarts.
The buttons 1, 2, 3 and P flash quickly,
configuration mode is exited.
Button Function
Automatic run-on.
As delivered, the function is turned on.
☞
Touch the button one time.
Button glows brightly:
Automatic run-on is activated.
☞
Touch the button one time.
Button flashes:
Automatic run-on is deactivated.