11
Multifunctional steam brush Use instructions
EN
!CAUTION!
Pressing the steam key too frequently may cause water to escape from the holes in the plate.
The steam brush can be used on any type of fabric. However it is recommended to check the fabric
label and its specifications and to check by stretching a small part of the fabric
Material of
garment
Required tempe-
rature
Time
Temperature range
Symbol
1
Nylon
80-100°C
10s
Low
2
Silk
100-140°C
30-40s
Low-middle
3
Cotton linen
180-220°C
1,40s
Middle-High
CLEANING THE STEAM BRUSH
Always remove the power cord from the electrical outlet and wait until the brush is cold.
Empty the water tank.
Clean the body and the brushes with a damp cloth without detergents.
Do not use metal wool or abrasive detergents.
Thoroughly dry the body of the steam brush.
TECHNICAL DATA
Tank capacity 100 ml
Power 1000W
Power supply 220-240V ~ 50 / 60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
