Bentel Security KYO 100, Руководство пользователя

Страница: 4 / 24

USER MANUAL 4
Š Š
Read this section thoroughly to get an overall view of
how to operate your system from a Keypad. KYO 300
manages up to 16
Alison/32LP Keypads (Fig. 1), or up to 32
MIA-D and/or Alison-DV Keypads. KYO100 manages up to
16 Alison-S or up to 16 Alison/32LP .
Alison/S , Alison/32LP , MIA-D and Alison-DV keypads are
similar except that:
MIA-D has a larger display and provides 3 pairs of fast
keys for instant activation of Burglar, Fire and Emer-
gency Alarms (to be programmed by your Installer);
Alison-DV is smaller and provides an integrated mi-
crophone and loudspeaker for Voice functions (Voice
message recording, Talk-Listen in sessions, etc.).
Alison-S is identical to Alison-DV but does not provide an
integrated microphone and loudspeaker (supported by
KYO 100 only).
Alison/32LP has a built-in proximity Reader and is for sys-
tem management only, therefore, it is not suitable for pro-
gramming purposes (refer to the Alison/32LP Instructions
leaflet).
Figure 1 shows the main components of the MIA-D ,
Alison-DV and Alison/32LP Keypads:
1 Function LEDs
2 Display
3 Microphone ( Alison-DV only)
4 Keys
5 Information chart
6 Flip
7 Instant Action Keys ( MIA-D only)
OPERATING YOUR SYSTEM FROM A KEYPAD
Contrast Adjustment
To adjust the contrast of the LCD display, press and hold:
C
to increase contrast
D
to decrease contrast
Brightness adjustment
To adjust the brightness of the LCD display, press and
hold:
A
to increase brightness
B
to decrease brightness
Superkey functions
If your Installer has set up the ‘ Superkeys ’, you will be
able to perform some “Quick” operations from the keypad
without using codes. The table on the next page shows
how to activate the programmed functions.
Fig. 1 - a ) MIA-D Keypad, b ) Alison-DV Keypad, Alison/32LP
NOTE: The 32 LEDs on ALISON/32LP Keypads correspond to the system Partitions (32 for KYO 300; 16 for KYO 100).
The Partition LEDs will turn
ON when the respective Keypad Partitions Arm, and OFF when they Disarm . They will Slow Blink if the system
detects Alarm or Tamper conditions and the respective Partitions are Disarmed, and Fast Blink if the system detects Alarm or Tamper conditions
and the respective Partitions are Armed.
$
3,1
3,1
3,1
3,1
3,1
3,1
"
"
!
"
#"
#
$
% & #
' #
(
) *
4
47
Q 'HV
$
Q 'HV
# #
+$
# "
!
$ #
" , ' !
# ,
-
! !
! !
-
!
!
!
" ! . "
. (
#
!