Installation and Operating Instructions - 1000V BUSS, Grounded (125A to 400A)
950-003342-000 Rev B
5
About This Book
This manual provides information on installing the Bentek Breaker Universal
Safety System. Information is included on mounting the equipment onto a
prepared base and connecting the wires to the proper locations.
Intended Audience
This manual is for those qualified to deal with the dangers and hazards involved
in installing electric devices. Those using this manual should be trained
professionals performing work consistent with local regulations. Users should be
skilled in reading site plans and electrical wiring schematics and should be
familiar with meeting requirements contained in UL 50, “Standard for Enclosures
for Electrical Equipment,” UL 514B, “Standard for Safety Conduit, Tubing and
Cable Fittings,” National Electrical Code, ANSI/NFPA 70, and other applicable
standards documents.
Notation Conventions
This manual uses the following notation conventions:
WARNING
WARNING
Warns you of something that could result in physical injury or death.
AVERTISSEMENT
Vous avertit de quelque chose qui pourrait avoir comme conséquence des
dommages corporels ou la mort.
CAUTION
CAUTION
Cautions you against anything that may damage equipment.
ATTENTION
Attentions vous contre tout ce qui peut endommager l'équipement.