OSD Instruction
On Screen Display (OSD) Instruction
The Menu Button on RX allows you to add, remove, or rename TX. You can also disconnect TX here.
To add another TX or remove existing TX
1. Press Menu Button.
2. Press Up or Down Button to select “Settings”.
3. Press Up or Down Button to Select “Add New Video Source” or “Rename Vider Source”.
4. If you want to add video source, please press the TX Sync Button after Step.3.
5. Press Up or Down Button to select the Video source you want to add or remove.
6. Select “OK” to apply the change.
Disconnect TX
1. Press Menu Button.
2. Press Up or Down Button to select “Settings”.
3. Select “Disconnect Transmitter”.
4. Select “OK” to apply the change.
Remove TX
1. Press Meni Button.
2. Press Up or Down Button to select “Settings”.
3. Select “Rename Video Source”.
4. Press Menu Button to select the video source to be renamed.
5. Press Up and Down Button to move horizontally and highlight the character to be changed.
6. Press Menu Button to select the character to be renamed.
7. Press Up or Down Button to change the character.
8. Press Menu Button to confirm selected new character.
9. Press and hold Menu Button to select “Apply” or “Cancel Rename Video Source”.
WHDI User Manual
3
