9
Introduction
Controls and functions
Projector & Remote control
1.
OK
Confirms the selected On-Screen Display
(OSD) menu item.
When Keystone OSD pops up, long press
for 2 seconds to reset Keystone.
2.
POWER
Toggles the projector between standby mode
and on.
ON
/
Off
Toggles the projector between standby mode
and on.
3.
BACK
Goes back to previous OSD menu, exits and
saves menu settings.
4.
MENU
Turns on the On-Screen Display (OSD) menu.
5.
POWER indicator light
/
TEMPerature
warning light
/
LAMP indicator light
.)
6. Arrow keys ( , , , )
When the On-Screen Display (OSD) menu is
activated, these keys are used as directional
arrows to select the desired menu items and
to make adjustments.
Keystone keys (
,
)
Displays the keystone correction page.
Volume keys
/
Decreases or increase the projector volume.
7.
SOURCE
Displays the source selection bar.
8. Keystone correction key
Displays the Keystone correction menu.
9.
LUMI EXPERT
Not operational on this projector.
10.
Toggles projector audio between on and off.
4
3
6
7
2
1
5
2
6
7
1
10
11
13
19
22
23
21
4
2
3
9
12
8
15
16
17
18
20
14
All the key presses described in this document
are available on the remote control or projector.
