background image

26 Operation 

 

Presenting from a Media Reader

The USB port on the projector allows you to browse the image and document files stored on a USB 
flash drive connected to the projector. It can elimate the need for a computer source.

Supported files formats

Viewing files

1.  Plug a USB flash drive into the 

MEDIA READER

 port of the projector.

2.  Press 

SOURCE

  and select 

Media Reader

. The projector displays the built in media reader main 

page.

3.   Press  / / /   to  select  and  press 

OK

 to enter the sub-folder or display a file.

4.  After a file is displayed, press 

OK

 to call out the function bar. You can press  /  to select the 

function and press 

OK

 to enact the selected item.

Shutting down the projector

1.  Press 

 on the projector or 

 / 

 on the remote 

control and a confirmation message will appear 
prompting you. If you don't respond in a few seconds, the 
message will disappear.

2.  Press 

 or 

 / 

 a second time. The power 

indicator flashes orange, the projection lamp shuts down, 
and the fans will continue to run for approximately 90 
seconds to cool down the projector.

3.  Once the cooling process finishes, the power indicator 

becomes a steady orange and fans stop. Disconnect the 
power cord from the power outlet.

Direct power off

The AC power cord can be pulled out right after the projector is turned off. To protect the lamp, wait 
about 10 minutes before re-starting the projector. If you attempt to re-start the projector, the fans may 
run for a few minutes to cool down. In such cases, press 

 or 

 / 

 again to start the projector 

after the fans stop and the power indicator turns orange.

Video format

Audio format

Photo format

• MPEG1
• MPEG4
• H.263
• Motion JPEG

• MPEG1/2 Layer1
• MPEG1/2 Layer2
• FLAC

• JPEG Base-line
• JPEG Progressive
• PNG non-interlace
• PNG interlace
• BMP

• To protect the lamp, the projector will not respond to any commands during the cooling process.
• Avoid turning on the projector immediately after turning it off as excessive heat may shorten lamp life.
• Lamp life results will vary depending on environmental conditions and usage.

Содержание TK850i















































Отзывы: