9
Introduction
Controls and functions
Projector & Remote control
All the key presses described in this document are available on the remote control or projector.
1.
POWER
/
TEMP
/
LIGHT
(See
2.
POWER (
/
)
Toggles the projector between standby mode
and on.
3.
BACK
Goes back to previous OSD menu, exits and
saves menu settings.
4. Arrow keys ( , , , )
When the On-Screen Display (OSD) menu is
activated, these keys are used as directional
arrows to select the desired menu items and to
make adjustments.
When OSD menu is inactive, workable under
CEC-capable sources only.
Keystone keys (
,
) (keypad)
Displays the keystone correction page.
Volume keys
/
(keypad)
Decreases or increase the projector volume.
5.
MODE/PIC MODE
Displays the picture mode menu.
6.
ECO BLANK
Used to hide the screen picture.
7.
OK
Confirms the selected On-Screen Display
(OSD) menu item.
8.
SOURCE
Displays the source selection bar.
9.
MENU
Turns on/off the On-Screen Display (OSD)
menu.
10.
Displays the keystone menu. See
for details.
4
5
7
9
8
6
2
1
3
2
13
8
6
4
7
2
10
3
11
12
14
9
5
15
