17
Operation
Operation
Starting up the projector
1. Plug the power cord. Turn on the power outlet switch
(where fitted). The power indicator on the projector
lights orange after power has been applied.
2. Press
on the projector or remote control
to
start the projector. The power indicator flashes green
and stays green when the projector is on.
The start up procedure takes about 10 seconds. In the
later stage of starting up, a start-up logo is projected.
(If necessary) Rotate the focus ring to adjust the image
clearness.
3. If this is the first time you turn on the projector, the setup wizard appears to guide you through
setting up the projector. If you have already done this, skip this step and move on to the next step.
• Use the arrow keys (
/ / /
) on the projector or remote control to move through the menu
items.
• Use
OK
to confirm the selected menu item.
Step 1:
Specify
Projector Position
.
For more information about projector position, see
Choosing a location on page 11
.
Step 2:
Specify OSD
Language
.
