Operation
37
heating. In such cases, you should switch to High Altitude mode to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s). Be
sure you have made a correct connection to the projector audio input. See
"Connection"
on page 18
for how the audio input is connected.
Activating SRS
To activate SRS:
1.
Press
MENU/EXIT
and then press / until the
SYSTEM SETUP: Advanced
menu is highlighted.
2.
Press to highlight
Audio Settings
and press
MODE/ENTER
. The
Audio
Settings
page appears.
3.
Highlight
SRS
and press / to select
On
.
Muting the sound
To temporarily turn off the sound:
1.
Repeat steps 1-2 above.
2.
Highlight
Mute
and press / to select
On
.
If available, you can also press
Mute
on the remote control to toggle projector audio between on and off.
Adjusting the sound level
To adjust the sound level, press
/
, or:
1.
Repeat steps 1-2 above.
2.
Press to highlight
Volume
and press / to select a desired sound level.
Adjusting the microphone volume
To adjust the microphone sound level:
1.
Repeat steps 1-2 above.
2.
Press to highlight
Microphone Volume
and press / to select a desired
sound level.
Turning off the
Power On/Off Ring Tone
To turn off the ring tone:
1.
Repeat steps 1-2 above.
2.
Press to highlight
Power On/Off Ring Tone
and press / to select
Off
.
The only way to change
Power On/Off Ring Tone
is setting On or Off here. Setting the sound mute or
changing the sound level will not affect the
Power On/Off Ring Tone
.
Содержание SX914
Страница 1: ...SX914 Digital Projector User Manual ...
