English
2
Notice
Cooling notice
y
Ventilation
Air inlet
Air outlet
y
Caution for installation
For proper ventilation of the projector, make sure to leave some space around the projector as
shown in the illustration below:
•
Table
50cm
above
50cm
above
70cm above
•
Ceiling
•
Stacking
30cm above
Minimum 100mm
When edge blending
•
To avoid the image shaking or some pixels in the display may be misaligned, do not use the
projector in the following location:
•
In a building close to a construction site.
•
In a room where an air conditioner unit is working and it vibrates.
•
In a place where the temperature changes dramatically that may cause thermal contraction.
•
Before making any adjustment, leave the projector lit for at least 15 minutes after its light source
is turned on. This allows the internal temperature of the projector to stabilize.
