24 Menu
operation
Menu operation
Please note that the on-screen display (OSD) menus vary according to the signal type selected and the
projector model you are using.
The menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.
Basic menu
Brightness
The higher the value, the brighter the image. Adjust this control so the black areas
of the image appear just as black and that detail in the dark areas is visible.
Aspect Ratio
There are several options to set the image's aspect ratio depending on your input
signal source.
•
Auto
: Scales an image proportionally to fit
the projector's native resolution in its
horizontal or vertical width.
•
Real
: Projects an image as its original
resolution and resizes it to fit within the
display area. For input signals with lower
resolutions, the projected image will be
displayed in its original size.
•
4:3
: Scales an image so that it is displayed in
the center of the screen with a 4:3 aspect
ratio.
•
16:9
: Scales an image so that it is displayed in
the center of the screen with a 16:9 aspect
ratio.
•
16:10
: Scales an image so that it is displayed
in the center of the screen with a 16:10
aspect ratio.
15:9 picture
(MX808STH)
(MW809STH)
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:10 picture
