31
Menu operation
User
Management
There is one user-definable mode if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the
User
)
as a starting point and customize the settings.
•
Load Settings From
1. Go to
Picture
>
Picture Mode
.
2. Press
/
to select
User 1
or
User 2
.
3. Press
to highlight
User Management
, and press
OK
. The
User
Management
page is displayed.
4. Select
Load Settings From
and press
OK
.
5. Press
/
to select a picture mode that is closest to your need.
6. Press
OK
and
BACK
to return to the
Picture
menu.
7. Press
to select the sub-menu items you want to change and adjust the
values with
/
. The adjustments define the selected user mode.
•
Rename User Mode
Select to rename the customized picture mode (
User 1
/
User 2).
The new name
can be up to 9 characters including English letters (A-Z, a-z), digits (0-9), and
space (_).
1. Go to
Picture
>
Picture Mode
.
2. Press
/
to select
User 1
or
User 2
.
3. Press
to highlight
User Management
, and press
OK
. The
User
Management
page is displayed.
4. Press
to highlight
Rename User Mode
and press
OK
. The
Rename
User Mode
page is displayed.
5. Use / /
/
, and
OK
to set desired characters.
6. When done, press
BACK
to save the changes and exit.
Brightness
The higher the value, the brighter the image. Adjust this control so the black
areas of the image appear just as black and that detail in the dark areas is visible.
Contrast
The higher the value, the greater the contrast. Use this to set the peak white level
after you have previously adjusted the Brightness setting to suit your selected
input and viewing environment.
Sharpness
The higher the value, the sharper the picture becomes.
