Using your Joybook
17
Port replicator (optional accessory)
The port replicator is an optional accessory that can be plugged into your
Joybook to extend the number of external peripheral devices it can
handle.
Before using the port replicator, you need to install the port replicator
driver from the supplied CD.
Connecting the port replicator
1. Align the connector with the port opening on the back of your
Joybook.
2. Insert the connector into the port until it is fully seated.
Removing the port replicator
1. Be sure to save all your files on your Joybook or power down your
Joybook altogether.
2. Detach the connector from your Joybook.
JB_R55V.book Page 17 Wednesday, February 7, 2007 4:56 PM
