BenQ InstaShow WDC10R, Руководство пользователя

Страница: 16 / 31

16 Installation
Pairing InstaShow Button and InstaShow Host
A set of InstaShow™ includes an InstaShow Host and two InstaShow Buttons, which are paired
before shipment. In that case, you don’t need to pair them again. However, if you buy two or more
sets of InstaShow™, and you want to pair a Button with a different Host, you need to follow the
instruction below. If you buy an additional InstaShow Button kit, and you want to pair the new
Buttons with your Host, you need to follow the instruction below as well.
When InstaShow Host is placed on the table
1. Make sure your InstaShow Host is ready with power supply. Connect InstaShow Button’s HDMI
and USB jacks to the corresponding inputs of a laptop.
2. When InstaShow Button is connected to the laptop, the LED indicator of InstaShow Button will
flash red. InstaShow Button is in pairing mode, waiting to pair with your InstaShow Host.
If an InstaShow Button nearby has been paired with an InstaShow Host before, it will turn static green.
USB
3.0
HDMI
1.4
MODE