27
Menu operation
DISPLAY menu
INSTALLATION menu
Image
Position
Displays the position adjustment page. To move the projected image, use the
directional arrow keys. This function is only available when a PC signal (analog RGB)
is selected.
Overscan
Adjustment
Conceals the poor picture quality in the four edges.
The greater the value, the more portion of the picture is concealed while the
screen remains filled and geometrically accurate. Setting 0 means the picture is
100% displayed.
PC Tuning
•
H. Size
: Adjusts the horizontal width of the image.
•
Phase
:
Adjusts the clock phase to reduce image
distortion.
•
Auto
: Adjusts the phase and frequency automatically.
These functions are only available when the PC signal is selected.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Choosing a location on page 11
Test Pattern
Adjusts the image size and focus and check that the
projected image is free from distortion.
Aspect Ratio
There are several options to set the image's aspect ratio depending on your input
signal source.
•
Auto
: Scales an image proportionally to fit the
projector's native resolution in its horizontal or vertical
width.
•
4:3
: Scales an image so that it is displayed in the center
of the screen with a 4:3 aspect ratio.
•
16:9
: Scales an image so that it is displayed in the
center of the screen with a 16:9 aspect ratio.
•
2.35:1
: Scales an image so that it is displayed in the
center of the screen with a 2.35:1 aspect ratio.
15:9 picture
4:3 picture
16:9 picture
16:9 picture
