BenQ DVY23, Руководство пользователя

Страница: 32 / 58

Network connection 32
Network connection
Network connection: Connect products directly with PC external network ports by
network wires or connect products to Internet network. Access network can be
through routers or switches. Users can login product IP through browsers.
Caution: Do not place wires where they are easily touched, so as not to cause unstable
signal transmission caused by poor line contact and affect video quality.
Adding segment method: The computer must add the network segment where the
product IP is located. If the network segment is not added, it will be unable to log in and
so on. The default IP address of the product is 192.168.5.163. Five network segments
need to be added to the computer.
The specific process is as follows:
First, open the attributes window of local connection of computer network, double-click
“Internet Protocol Version 4 (TCP/IPv4)” or point attribute “Internet Protocol Version 4
(TCP/IPv4)” and enter the attributes window of Internet Protocol Version 4 (TCP/IPv4).
Click “Advanced” to enter the advanced TCP/IP settings, and add IP and IPv4 to the IP
address bar. Subnet mask, add the completion point “confirm”, that is, complete the IP
segment addition.
Users can add corresponding network segments according to their modified product IP
address.
Verify the success of adding network segments. Open “Start” in the computer, select
“Run” to enter cmd, click “OK” and open the DOS command window to enter Ping
192.168.5.26. Press the Enter key. The information appears as follows: Explain the
success of adding network segments.
After the product self-check is completed, the above steps can also be followed to verify
whether the network is connected properly. If the default IP opens the DOS command
window of the computer, input Ping 192.168.5.163 and press the Enter key, the
information appears as follows: the network connection is normal.
Adding an IP address does not conflict with other computers or products. Verify that this IP exists
before adding it.