BenQ DE350, Руководство пользователя

Страница: 40 / 120

34 Initializing the DVD Recorder
En
gli
sh
Adding/deleting TV channels
How to view a listing of stored TV channels:
1. Press the
Setup
button on the remote control to
launch the ’Setup’ menu.
2. Press the
Up
or
Down
button to select
the
Video Setup
icon.
3. Press the
Right
button, and then press the
Up
or
Down
button to select ’
Channel
Setup
’. The channel list will display on the right side
of the screen.
This is a scrolling list which can store up to 99
channel frequencies. All the channel frequencies
found during the automatic channel search will be
listed in order of being found (by frequency).
The position of each channel frequency in the list is
indicated by the position number ’CH xxx’ where
’xxx’ represents the three digit channel position
number. This number is recorded in the name of a
video when a DVD recording is being made from the
’ANTENNA’ input.
How to add/delete channels:
1. Display the channel frequency list. See "How to view
a listing of stored TV channels:" above.
2. Press the
Right
button to move the highlight bar
on the channel frequency list.
3. Press the
Up
or
Down
buttons to
move the highlight bar to the channel frequency you
wish to add or delete.
4. Press the
OK
button to toggle the highlighted
channel between added (a checkmark appears beside
the channel number) or deleted (no checkmark
appears beside the channel number).
5. Repeat the above step to add or delete other
channels on the channel frequency list.
6. Press the
Setup
button to close the menu.