BenQ AU2000, Руководство пользователя

Страница: 22 / 35

Operations 21
AUX/3.5 mm Audio Jack
Ethernet (RJ-45)
An Ethernet connection allows you to connect your speaker to the internet
via a LAN cable and allow it to access Spotify and vTuner without a Wi-Fi
connection. To setup an Ethernet connection follow the steps below:
SPDIF
1. Use the supplied 3.5 mm cable to connect any audio source with a 3.5
mm audio jack to the AUX port at the rear of the speaker.
2. Press the AUX/RCA button on your speaker or the AUX button on the
remote control to switch to the AUX audio input.
3. Play any media on the audio source and the speakers will play the audio.
1. Use a LAN cable to connect your speaker to a router with internet
access.
2. Install the treVolo A app on your smart device.
3. Launch the treVolo A app on your smart device.
4. Select “Add new speaker” in the treVolo A app.
5. Select “Cable” in the treVolo A app.
6. Select “Next” in the treVolo A app. The speaker will begin connecting
to the router.
7. Once the speaker has successfully connected to the router you can
update the name of your speaker then select “Done” to finish the
Ethernet setup process.
If both a Wi-Fi connection and an Ethernet connection have already been setup on
your speaker, the speaker will by default enable the Ethernet connection when the
Ethernet port is connected to the router.
1. Use a SPDIF cable to connect any digital audio source with a SPDIF port
to the SPDIF port at the rear of the speaker.
2. Press the Bluetooth
® /SPDIF button on your speaker or the SPDIF
button on the remote control to switch to the SPDIF audio input.
3. Play any media on the audio source and the speakers will play the audio.