BenQ 9H.V1875.TBE, Руководство по обслуживанию

Страница: 13 / 90

13
5.3 Customer Acceptance
E24-5500 (AUO Panel) LCD TV Customer Acceptance Criteria
1.0 SCOPE
This document establishes the general workmanship standards and functional Acceptance criteria for LCD TV
model SV4231 Produced by AUO Inc.
2.0 PURPOSE
The purpose of this publication is to define a procedure for inspection of the LCD TV by means of a customer
acceptance test, the method of evaluation of defects and rules for specifying acceptance levels.
3.0 APPLICATION
The "Customer Acceptance Criteria" is applicable to the inspection of the LCD TV, completely packed and ready for
dispatch to customers. Unless otherwise specified, the customer acceptance inspection should be conducted at
manufacturer's site.
4.0 DEFINITION
The "Customer Acceptance Criteria" is the document defining the process of examining, testing or otherwise
comparing the product with a given set of specified technical, esthetic and workmanship requirements leading to an
evaluation of the "degree of fitness for use", including possible personal injury or property damage for the user of the
product.
5.0 CLASSIFICATION OF DEFECTS
The defects are grouped into the following classes:
5.1 Critical defect
A critical defect is a defect that judgment and experience indicate is likely to result in hazardous or unsafe conditions
for individuals using, maintaining or depending upon the product.
5.2 Major defect
A major defect is a defect, other than critical that is likely to result in failure, or to reduce materially the usability of the
product for its intended purpose.
5.3 Minor defect
A minor defect is a defect that is not likely to reduce materially the usability of the product for its intended purpose, or
is a departure from established standards having little bearing on the effective use of operation of the product.
Note: If BenQ defect undefined failure, and it judged that is reduce the merchandise ability, BenQ CM Inform this
defect. After that parties make communication and decide how to solve.
6.0 CLASSIFICATION OF DEFECTIVES
A defective is a product, which contains one or more defects. The defective will be classified into following classes:
6.1 Major defective
A major defective contains one or more defects and may also contain minor defects but contains no critical defect.
6.2 Minor defective
A minor defective contains one or more minor defects but contains no critical and major defects.
7.0 EXPRESSION OF DEFECTIVES
Number of defects
Percent of defects = ------------------------------------------------ X 100%
Number of products inspected
8.0 INSPECTION STANDARD
Unless otherwise specified, the inspection standard will be defined by MIL- STD-105E (ISO-2859), SINGLE