Headset Bluetooth
®
(en)
© Sie
m
en
s AG 20
05,
C:
\_
Christine\
Acc
essor
ies\
05GU
W
00
103 Loennerhe
den_
H
eadsets HH
B-
100\
Work\
Sat
z\
Frame
left page (6)
of Headset Bluetooth HHB-100 en, A31008-H2801-A102-1-ZC19
6
Templa
te: X75, Versi
on 2.2;
VAR L
anguage: unkn
own;
VAR issue date: VAR_Iss
ue_DATE
Switching the headset on
and off
• Switch on:
a
Press for about
2 seconds
. The LED
lights for
1 second
continuously. A low
and a high tone can
be heard.
If no connectable mo-
bile phone can be
found, please repeat
the pairing. If no mo-
bile phone is connect-
ed with the headset,
it switches off auto-
matically after 1 hour.
• Switch off:
a
Press for about
3 seconds
. The LED
lights continuously
for
1 second
and then
goes out. A high and a
low tone can be
heard.
Establishing the first
connection with the mobile
phone (pairing)
The headset must be switched
off.
1. Press the
a
button for
at least 5 seconds. The LED
lights continuously, and two
high tones can be heard. Your
mobile phone can now "look
for" the headset.
2. Activate the search mode of
your mobile phone. Please
read the notes on this in the
user guide of your mobile
phone.
3. If your mobile phone finds
your headset, this is shown on
the mobile phone display
beneath the device name
HHB-100
.
4. If requested, enter the code
(PIN) of the headset on the
mobile phone:
0000
The headset is now registered to
your mobile phone.
For additional information
please consult your mobile
phone's user guide.
If your mobile phone does not find the
headset within 3 minutes, activate the
search mode again (repeat step 1).
