Introduction
1.1 General notes
5235 / 05/2022 en
BENNING MM 7-2
7
1
Introduction
The TRUE RMS digital multimeter BENNING MM 7‑2 described here (in the following only
referred to as “device”) is intended for testing in electric circuits with a nominal voltage up to a
maximum of 1 000 V‑AC or 1 000 V‑DC. The device enables you to perform the following tests
and measurements:
• DC and AC voltage measurement
• DC and AC current measurement
• Resistance measurement
• Diode and continuity test
• Capacitance measurement
• Frequency and duty cycle measurement
• Temperature measurement
Further information
http://tms.benning.de/mm7‑2
On the Internet, you will find the following additional information directly at the specified link or
at www.benning.de (product search):
• Operating manual of the device in several languages
• Further information depending on the device (e. g. brochures, technical reports, FAQs)
1.1
General notes
Target group
This operating manual is intended for the following groups of people:
• Qualified electricians and electrotechnically trained personnel
Required basic knowledge
To understand these operating manual, you will need general knowledge of testing and
measuring equipment. Moreover, you will need basic knowledge of the following issues:
• General electrical engineering
