Benning 044166, Руководство по эксплуатации, Страница: 18 / 22

6.1 Maintenance schedule
Maintenance
5186 / 07/2021 en BENNING CC 4-1 / CC 4-2 18
6 Maintenance
There are no components in the device that you can replace.
WARNING
Opening the device
Danger to life or serious injury is possible due to contact with high electric voltage when opening
the device. The device might get damaged.
• Do not open the device.
• Please contact your specialty retailer or the returns management [
}
page 7] for any repairs.
6.1 Maintenance schedule
The following table provides an overview of all maintenance and servicing work that you must
carry out permanently or at regular intervals.
Interval Measures
Regularly, as needed
• Cleaning the device [
}
page 18]
Every 12 months • Calibrating the device [
}
page 18]
Table 7: Maintenance schedule
6.2 Cleaning the device
Clean the device regularly and as the need arises.
Requirements
• A clean and dry cloth or special cleaning cloth
NOTICE
Wrong cleaning agents
Using the wrong cleaning agents can damage the device.
• Do not use any solvents, abrasives or polishing agents.
Procedure
Clean the exterior of the device with a clean and dry cloth or a special cleaning cloth.
6.3 Calibrating the device
Benning guarantees compliance with this technical and accuracy specifications stated in this
operating manual for the first 12 months after the delivery date.
To maintain accuracy of the measuring results, make sure that the device is recalibrated in
annual intervals by the BENNING Service [
} page 7] .