Benning 044166, Руководство по эксплуатации, Страница: 16 / 22

5.1 Requirements for measuring
Operation
5186 / 07/2021 en BENNING CC 4-1 / CC 4-2 16
5 Operation
You can carry out measurements using a multimeter [
}
page 17] or the BENNING IT 200
installation tester [
}
page 17] .
5.1 Requirements for measuring
• Please observe the operating manual of the multimeter or installation tester used (especially
the safety instructions and warnings contained therein).
• Do not clamp the conductor with the device until you have connected the device to a
multimeter or a BENNING IT 200 installation tester.
• Please observe the information regarding measuring accuracy [ } page 14].
• Please consider sources of interference that might be present. Strong sources of
interference in the vicinity of the device might involve unstable readings and measuring
errors.
DANGER
Maximum admissible voltage
Danger to life or serious injury is possible due to contact with high electric voltage.
• Use the device only in electric circuits of overvoltage category III with a conductor for a
maximum of 600 V‑AC to earth.