Bennett HIGH FLOW H35, Инструкция по эксплуатации

Страница: 71 / 98

Diagnostics
Bennett HF H35 Instruction Manual 67
DIAGNOSTIC’S CODE 2 – ERROR HISTORY
The error log file displays the last 10 errors for each selected side that are
included in the error log file. The errors are displayed for the selected side. If the
latest 10 errors were all on side 1, then no errors would be displayed on side 1,
and 10 errors would be displayed on side 2. Refer to
Figure 5.6 .
1. Enter diagnostics and press the 2 button on the keypad and the Enter
button.
2. Press the Enter button to view the data in descending chronological order.
3. Press the Cancel button to exit this code.
4. Press the Cancel button twice to exit Diagnostics.
DIAGNOSTIC’S CODE 3 – CPU TEST
The CPU test deliberately introduces a fault into the arithmetic unit of the CPU. The display must then flash
ERROR
99
indicating
the system has detected the fault. If the message is not displayed, the test has failed.
1. Enter diagnostics and press the 3 button on the keypad and the Enter
button. A typical test appears as shown in Figure 5.7 .
2. The 99 error will clear when the Cancel button is pushed to exit
Diagnostics.
3. Press the Cancel button to exit this test.
4. Press the Cancel button twice to exit Diagnostics.
Sale $
E r r O r L O g
Kilograms
N O E r r
0 0 0 0 0 0 0 0
Figure 5.6 – Error History
Sale $
E r r O r
Kilograms
9 9
d i a g 3
Figure 5.7 CPU Test