BeneVision TM80, Руководство оператора

Страница: 79 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 7 - 13
2. Tap the icon to exit the ECG menu.
7.4.5 Configuring the Pacer
To configure the pacer, follow this procedure:
1. In the Pacer section of the ECG menu, select the options described in the following
table.
2. Tap the icon to exit the ECG menu.
Options Description Settings*
All Lead Size Selects the waveform size for all the
leads.
To set the waveform size for a
specific lead, select that lead from
the
Waveform Size field.
1.25 mm/mV, 2.5 mm/mV, 5
mm/mV,
10 mm/mV , 20
mm/mV, 40 mm/mV, Auto
This configuration will be applied for all ECG waveform sizes.
Speed Selects the waveform sweep speed. 6.25 mm/s, 12.5 mm/s , 25
mm/s
* The factory default settings are in bold.
Options Description Settings*
Paced Selects the paced status. Unspecified , No, Yes
Unspecified is only available
for the first time you set the
paced status.
Refer to 7.3.6 Checking the
Paced Status for details.
Markers Selects the pacer indicator.
■
Line
A 1 cm line shows above each ECG
waveform each time the pace pulse
is detected.
■
Dot
A 2 mm dot shows above each ECG
waveform each time the pace pulse
is detected.
Line , Dot, Off
Pacer Reject Selects whether or not to reject the
pace pulses. On, Off
* The factory default settings are in bold.