BeneVision TM80, Руководство оператора

Страница: 18 / 240

1 - 4 BeneVision TM80 Telemetry Monitor Operator’s Manual
with the relevant EMC requirements. Mobile phone, X-ray equipment, micro-
wave oven, interphone, or MRI equipment are a possible source of interference
as they may emit higher levels of electromagnetic radiation.
•
Always install or carry the telemetry monitor properly to avoid damage caused
by drop, impact, strong vibration or other mechanical force.
•
Dry the telemetry monitor immediately in case of rain or water spray.
•
When the patient carrying a telemetry monitor moves in a hospital, signal
quality can be impacted on an ambulatory patient by the construction
materials used within the hospital.
•
At the end of its service life, the telemetry monitor and its accessories must be
disposed of in compliance with the guidelines regulating the disposal of such
products to prevent bringing potential negative consequences to the
environment and human health. If you have any questions concerning disposal
of the equipment, please contact Mindray.
1.1.3 Notes
NOTE
•
Put the equipment in a location where you can easily see the screen and access
the operating controls.
•
In normal use, the operator shall stand in front of the equipment.
•
The software was developed in compliance with IEC60601-1-4. The possibility
of hazards arising from software errors is minimized.
•
This manual describes all features and options. Your equipment may not have
all of them.
•
Keep this manual in the vicinity of the equipment so that it can be obtained
conveniently when needed.