BeneVision TM80, Руководство оператора

Страница: 102 / 240

8 - 4 BeneVision TM80 Telemetry Monitor Operator’s Manual
■
Press the key to enter the main menu
→
tap Parameter Setup
→
tap Resp .
8.4.3 Configuring the Resp Setup
To configure the Resp setup, follow this procedure:
1. In the Setup section of the Resp menu, select the options described in the following
table.
2. Tap the icon to exit the Resp menu.
8.4.4 Configuring the Resp Waveform
To configure the Resp waveform, follow this procedure:
1. In the Waveform section of the Resp menu, select the options described in the fol-
lowing table.
2. Tap the icon to exit the Resp menu.
8.4.5 Configuring Resp Alarm Settings
To configure Resp alarm settings, follow this procedure:
1. In the Alarms section of the Resp menu, tap Resp Alarm Setup .
2. Select the options described in the following table.
Options Description Settings*
NCM Alarm Delay The telemetry monitor will trigger
the “No Chest Movement” alarm if
the patient has stopped breathing
for longer than the set apnea time. 10s, 15s, 20s , 25s, 30s, 35s,
40s
Color Selects the color of Resp digital data
and waveform. 16 colors
The default color is yellow.
* The factory default settings are in bold.
Options Description Settings*
Gain Selects the waveform size. x0.25, x 0.5, x 1, x2 , x3, x4, x5
Speed Selects the waveform sweep speed. 3mm/s, 6.25 mm/s , 12.5
mm/s, 25 mm/s
* The factory default settings are in bold.