MANUAL Of Professional
1080P HD-SDI
MAIN MENU:
IRIS
MENU
ELC
Model No: VCC-7400SDI
Day/Night Box Camera
READ THIS MANUAL CAREFULLY BEFORE ITSTALING AND
FOCUS ADJ
EXPOSURE
BACKLIGHT
DAY&NIGHT
COLOR
DNR
IMAGE
MOTION
SYSTEM
EXIT
MENU ADJUSTMENT:
OFF
OFF
EXTERN
MIDDLE
OFF
OPERATING THIS PRODUCT
CAUTIONS
1. Please
don’t touch the sensor and lens with your hand.
2. Please
don’t install the camera in following unstable conditions
shake, rain, too hot, too cold etc.
3. The recommended conditions of the installation are temperature
from -10
℃
to 50
℃
and moisture under 85%.
4. Please kindly contact your sales person in case you have any
questions on assembly or installation.
1. Features:
·
1/3
” CMOS Sensor
Press Menu button to enter main menu, and then main menu options will
display on the screen. Use the UP/DOWN Button to move cursor to different
menu options, and use the LEFT/RIGHT Button to set or adjust the menu
parameter. Please press Menu Button to EXIT after finishing adjustment.
SUBMENU OPTION:
Some menu options have its submenus, if the right side of menu option
display., please press Menu button to enter submenu for parameter settings.
SUB-MENU:
EXPOSURE
·
2 Mega Pixels
·
Video Output: HD 1080P@30fps/25fps
·
3D-NR/Smart NR/Sense-up/Digital Zoom Functions etc.
·
CS Mount Joint
·
650nm Optical Filter
Features & Attachment:
2. Attachment:
·
One User Manual
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
IiiiiiIiiiiiI 10
AUTO
X2
IiiiiiIiiiiiI 10
·
Tools & Installation Screws
1.
IRIS
MAIN MENU OPTIONS FUNCTION
Assembly Installation:
1. Firstly, find a suitable position to install the bracket of the camera, install
the bracket on the ceiling or walling by screws..
2. Fixed the box cameras on the bracket with manually twisting.
3. Input the power to the power connector indicated in the drawing. Check
the input voltage according to the camera label.
4. Connect the BNC outputting SDI signal indicated in the drawing to
DVR or other SDI converter equipment. Another BNC is an analog video
output, used for installation video adjusting.
5. Adjust the camera direction and lens until you can get a good image of
target by adjusting the camera bracket.
Menu Function Introduction:
UP
Select the lens type, ELC/ALC selectable. Default setting is
“ELC”.
ELC: Eletronic Light Control, for Manual Iris lens.
ALC: Automatic Light Control, for DC Iris lens
2.
FOCUS ADJ
This function is to help you make cameras focus well of all area. When it is
activated,
3.
EXPOSURE
1) BRIGHTNESS: Setting output brightness. Default setting is 10.
2) SHUTTER: Selecting shutter mode: AUTO / Manual / FLIK and it is also
adjustable from 1/25-1/50000. It is adjustable from X2-X30 under
Sense-up condition. Default setting is
“AUTO”.
3) SENSE-UP: OFF/X2/X4/X8/X16/X32. It is only available under the AUTO
shutter mode. Default setting is
“X2”.
4) AGC: Setting from 0 to 10. Default setting is 10.
4.
BACKLIGHT
Backlight compensation: OFF / HLC / BLC / WDR
●
SUBMENU OF HLC:
LEVEL: Setting the sensitivity of compensation area. Default setting is
“10”.
COLOR: Setting the color of high light compensation area, including
BLK(black) / WHT(white) / YEL(yellow) / CYN(cyan) / GRN(Green) /
MAG(magenta) / RED(red) / BLU(blue). Default setting is
“BLK”.
●
SUBMENU OF BLC:
BLC OSD:
LEFT
DOWN
RIGHT
H-POS: setting the position of the range of backlight area to left and right.
Default setting is
“8”.
V-POS: setting the position of the range of backlight area in the ZONE NUM
to up and down. Default setting is
“7”.
H-SIZE: increase and decrease the size of the range of backlight area
ENTRY OF MENU
: Press Menu Key for 1 second, and release to enter
Menu Option.
BUTTON INSTRUCTION:
MENU:
Function: Press Menu button to enter Main MENU.
Menu button is also an Enter Key to enter submenu.
UP/DOWN:
Function: Navigate UP or DOWN button to choose different menu options.
LEFT/RIGHT:
Function: Change the parameter of main menu options or submenu options.
horizontally. Default setting is
“3”.
V-SIZE: increase and decrease the size of the range of backlight area in the
ZONE NUM vertically. Default setting is
“3”.
●
SUBMENU OF WDR
WEIGHT: Setting the effect, LOW / MIDDLE / HIGH selectable Default
setting is
“MIDDLE”.
RETURN: return to upper menu.
5.
DAY&NIGHT
Setting day and night mode, EXTERN / AUTO / COLOR / B&W selectable.
