Operation Manual
EL512.256-H3 Series Display
Beneq Oy
Olarinluoma 9
Tel. +358 9 7599 530
VAT ID FI19563372
FI-02200 Espoo
Fax +358 9 7599 5310
www.beneq.com
Finland
www.lumineq.com
Date: February 13, 2017
Document number: ED000818B
Page | 14
7
Mechanical characteristics
7.1
Display external dimensions
Figure 6 shows the mechanical dimensions of a standard EL512.256–H series display unit.
The display can also be delivered with an optional FRA aluminum frame or an FRB steel frame
(see Figure 5 and Figure 6). Using FRB frames makes the display mounting compatible with
MD512.256 displays. See Ordering Information on page 19.
Table 9. Display external dimensions
Height
136 mm
5.35 in.
Width
233 mm
9.17 in.
Depth
16.5 mm
0.65 in.
Weight
400 g
14 oz.
7.2
Display viewing area characteristics
Table 10. Display viewing area characteristics
Active area
millimeters (inches)
height
97.5 (3.84)
width
195.1 (7.68)
Pixel pitch
millimeters (inches)
height
0.381 (0.015)
width
0.381 (0.015)
Pixel size
millimeters (inches)
height
0.25 (0.01)
width
0.25 (0.01)
Pixel fill factor
43%
Pixel matrix
512 horizontal by 256 vertical
CAUTION:
The ambient temperature of the display should not be allowed to exceed the
environmental specifications (see Table 7). In most applications, an air gap of approximately
5 mm is recommended (see mechanical drawings). Some applications may require, however,
a larger air gap or cooling of the display unit in the system. Note that this may slightly
increase the total depth of the design.
