TOOLS
67
Deleting several pairings
To delete several pairings at once, press
"
and
select
Delete many...
You can delete all pairings or
check off separately the pairings that you want to
delete. Confirm you choice by pressing
.
Yes
.
GPS monitor
With the GPS monitor application you can get dif-
ferent data from GPS receiver in graphical and
numeric format. The data contains e.g. satellite
positions and status, coordinates, speed, and
compass information.
The application has the following monitor views:
satellite view, position view and compass view.
You can switch between the views by pressing
n
left/right.
SATELLITE VIEW
The satellite view consists of the following ele-
ments, that are constantly being updated.
•
Graphic satellite view
: Shown are locations of
the satellites that are available and relative to
the phone´s last known position. Satellites
are labeled and color-coded as follows:
-
Red
indicates satellite without ephemeris
-
Yellow
indicates satellite with ephemeris,
that is not used in navigation solution
-
Green
indicates satellite with ephemeris that
is used in navigation solution.
•
Satellite bar
: A bar graph for the 12-channel
satellite signals. The length of each of the
bars signify signal strength, color-coding is as
listed above.
•
Counter of last position fix
: Age of the last known
position fix in the time period format (days,
hours, minutes and seconds).
POSITION VIEW
The position view consists of the following data
fields, that are constantly being updated.
These data fields use units that you can select
and change in the
Phone settings
. See
tance, speed, altitude and position on page 51
particular data is not available value is shown as
hyphens.
•
Value
: Shows user selected value that can be
coordinates, UTC-time or speed.
-
Coordinates
: Coordinates of the last known
position are shown in WGS84 format
hddd°mm‘ss,s”