Benefon TRACKBOX 2.1, Руководство по эксплуатации, Страница: 58 / 70

PART B: OPERATING THE TRACKBOX
58 OUTGOING CALLS AND MESSAGES
Trace log
The device stores position data in its memory automatically.
Stored data contains position information and time stamp.
The maximum storage capacity is 1000 positions. Once the
log is full, the device stacks the information by dropping off
irrelevant positions. When positions cannot be dropped any
more without losing important information, there are two
ways to proceed:
•Log overwrite: In case the log is not transferred at all, the
device will automatically replace the oldest positions with
the new ones.
•Log transfer: The log can be transferred from the device
locally, by using the Benefon Configurator and data cable.
DOWNLOADING TRACE LOG
When the device returns home, connect it to the Benefon
Configurator by data cable. The log is loaded from the de-
vice to the software the same way as other settings. For more
information, see
LOADING SETTINGS FROM THE TRACKBOX TO
THE SOFTWARE ON PAGE 10
.
When the Benefon Configurator loads the log from the de-
vice, the trace log file appears automatically in the display in
readable text format. The
Trace log icon is shown under the
My Benefon node on the left, and by clicking the icon the ac-
tual trace log file will be shown in the Document window on
the right.
S a v i n g l o g f i l e
To save the trace log in the Benefon Configurator, choose
Save
or
Save as..
from the
File
menu. The trace log file will
be saved in readable text format (.log).
D e l e t i n g l o g f i l e
To delete the trace log in the Benefon Configurator, choose
Delete trace log from the Mobile menu.
NOTE: If you delete trace log from My Benefon node, the log
is lost once and for all. So, make sure to store the log some-
where in case you need to recall the log information after-
wards.
PROCESSING TRACE LOG BY USING SOME
OTHER APPLICATION
Trace log files cannot be edited in Benefon Configurator. In
order to
modify or print the log file, do as follows:
1. First save the log in Benefon Configurator. The log file
identifier will become .log .
2. Open Windows Excel or Notepad. Make sure, the Files
of type shows All files .
3. Open the log file in the chosen application.