Benefon TRACKBOX 2.1, Руководство по эксплуатации, Страница: 43 / 70

I/O SETTINGS 43
PART A: CONFIGURING SETTINGS FOR THE TRACKBOX
Log settings
The device can be configured to collect incoming/outgoing
data from the I/O pins. The device can also be configured to
store plain positions at defined intervals.
Stored data may contain information on battery level, posi-
tion, date and time, speed, direction, triggered event, event
value, ID, type and so on.
POSITION LOG INTERVAL
With the position log interval setting, you can determine the
device to store plain positions at pre-defined intervals. This
way positions are calculated and logged more frequently.
Key in the interval in seconds (1). The interval can be set be-
tween 15 and 65536 seconds. If the value is set to zero, the
position log interval is NOT in use.
EVENT LOG SETTINGS
A c t i v a t i n g E v e n t l o g
Click the arrow and highlight the desired option (2).
• No pin events are logged : The device does NOT gather any
pin information in the Event log .
• All pin events are logged : The device will gather pin infor-
mation from all active pins, despite of the options
selected in the
Event data fields.
• Marked pin events are logged : The device will gather pin
information from a pin under these conditions: The Activ-
ity box is checked and Event data field is set to Write in
event log , or Send and write .
1
2
3
4
5
6