BENDIXKing KFC225, Руководство пилота

Страница: 10 / 25

FlightSim Developers
KFC 225 Autopilot
Pilot Handbook
- 10 –
For use with Microsoft Flight Simulator only. Not to be used in real world aviation.
The display will annunciate HDG
and the AP Servo Annunciator
will illuminate when the unit is in
Active Mode .
The aircraft will hold this course as long as:
•
The HSI/Gyro HDG Bug is not changed.
•
The unit is still in Heading Hold Function.
•
The AP Master Key is on and the unit is in Active Mode .
• Heading Hold Function is not overridden by the .
•
No Error! Reference source not found.exists.
NAV Hold Function
Depress the NAV Key to toggle this mode on/off. When the
system is engaged, the key will illuminate. This function is
one of three that receives its input data from the NAV 1
Radio. This function is designed to follow the radial,
selected on the HSI/Gyro Omnibearing Selector (OBS) .
The NAV Hold Function is
available if a signal is tuned
in on the NAV 1 radio.
The display will annunciate
NAV when the NAV Key is
depressed.
If a NAV 1 signal is not being
received, the NAV
annunciator on the panel will
flash, indicating that no NAV
Function is possible until such
time as a signal is being
received.
When the NAV Hold Function is
engaged, if the selected CDI
Indicator is less than 50% deflected
when armed, the system will
automatically capture.
The mode provides automatic beam capture and tracking of VOR, LOC or GPS as selected.