AV8OR User’s Guide
Automotive Mode Operation
Pub. No D200803000008 Page 4-44 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
o
Tap
o
to open the list of results before it appears
automatically.
4. Pick the street from the list.
5. Enter the house number:
1.
Tap
.
2.
Enter the house number on the keyboard.
3.
Tap
to finish entering the address.
6. A list appears with the matching addresses. Tap the desired one.
7. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Enter an Address without knowing the
district/suburb
Long roads can run across several districts or suburbs. You may not
know if a particular house number is in which of them. In this case,
follow the instructions below:
The procedure is explained starting from the Navigation menu.
1. Tap the following soft Keys:
(Simple mode), or
,
(Advanced mode).
2. By default,
GoDrive
proposes the country/state and settlement
where you are. If needed, tap the soft Key with the name of the
country/state, and select a different one from the list.
